H20-8501™ SERIES LIQUID COOLING KITS CONTINUED... CUSTOMIZING YOUR OWN KIT FROM VARIOUS COMPONENTS Adding a second radiator is easy, and recommended in the following scenarios: Dual CPU setup: while operating dual CPU's with the basic single radiator kit is possible, the extra thermal load placed on the cooling system might require installing a stronger fan than that delivered with the kit, thus increasing audible noise. Adding a second radiator to the loop restores the proper balance between high performance and low noise offered by the basic H20-8501 kit. Extreme Overclocking: for enthusiast users seeking to squeeze extra Mhz from their microprocessors. Extremely quiet operations: where silent operations are preferred, adding a second ratiator will allow users to operate the fans at low speed, using a rheostat for example, while maintaining optimum processor temperature, even under substantial overclocks. For optimum performance, it is imperative to connect two radiators in a "parallel" configuration, and not in series. Starting from any section of the circuit, use a "Y" connector to split the line in two , and connect each branch to the inlet of each radiator. Then connect each outlet tube from the radiators to a second "Y" and re-attach the discharge from the Y to the rest of the circuit. A second radiator installed in such a way will afford a CPU temperature improvement of 5°Cto 7°C. Adding a second water-block for multiprocessor environments is even easier, as water-blocks need only to be connected in series: the discharge from one to the inlet of the other. Adding VGA and/or chipset coolers follows the same rule as adding a second water-block: simply daisy chain the devices in series following the CPU water-block. Note concerning high-end VGA adapters, such as ATI® Raideon® 9700/9800 or nVidia® FX58/5900: it is suggested that adding a second radiator to the circuit will also enable higher overclocks with such graphic adpaters. The MCW50™ VGA cooler The MCW20™ chipset cooler Configuring the kit for 3/8" OD tubing: while it must be noted that 3/8" OD tubing will significantly reduce coolant flow-rate and affect cooling performance, such a configuration is possible, and sufficient in non or mildly overclocked systems: for example when users are mainly concerned with quiet operations. The following parts are then needed to adapt the kit to 3/8" OD tubing: Radiator: Part # PI0412S Pump, fill & bleed kit, and water-blocks: simply plug-in the following adapter into each 1/2" fitting, to reduce them to 3/8": Part # PI061612S back to top VERSIONS H20-8501-A Part # H20-8501A for AMD® processors, includes: MCW5000-A™ release 2 water-block compatible with: AMD® Duron®, Athlon®, MP & XP, socket 462 Intel® Pentium® 3, socket 370 MCR80-F1 Radiator with (1) 80x80x25mm fans rated at 31.4 CFM (28dbA), (2) nylon clamps MCP600™ 12 Volts DC industrial pump connects directly to computer power supply FBK525™ fill and bleed kit assembly 12 feet 1/2" vinyl tubing, and tube inserts 2 Oz bottle HydrX™ extreme duty coolant Arctic Alumina™ thermal paste Part # H20-8501P for Intel® Pentium® 4 processors includes: MCW5000-P™release 2 Intel® Pentium® 4, socket 478 compatible water-block MCR80-F1 Radiator with (1) 80x80x25mm fans rated at 31.4 CFM (28dbA), (2) nylon clamps MCP600™ 12 Volts DC industrial pump connects directly to computer power supply FBK525™ fill and bleed kit assembly 12 feet 1/2" vinyl tubing, and tube inserts 2 Oz bottle HydrX™ extreme duty coolant Arctic Alumina™ thermal paste   Part # H20-8501X for Intel® Xeon™ processors includes: MCW5000-X™ release 2 Intel® Xeon™ compatible water-block MCR80-F1 Radiator with (1) 80x80x25mm fans rated at 31.4 CFM (28dbA), (2) nylon clamps MCP600™ 12 Volts DC industrial pump connects directly to computer power supply FBK525™ fill and bleed kit assembly 12 feet 1/2" vinyl tubing, and tube inserts 2 Oz bottle HydrX™ extreme duty coolant Arctic Alumina™ thermal paste   Part # H20-8501-64 for AMD® Athlon® 64 & Opteron® processors includes: MCW5000-64™ AMD® Athlon® 64 & Opteron® compatible water-block MCR80-F1 Radiator with (1) 80x80x25mm fans rated at 31.4 CFM (28dbA), (2) nylon clamps MCP600™ 12 Volts DC industrial pump connects directly to computer power supply FBK525™ fill and bleed kit assembly 12 feet 1/2" vinyl tubing, and tube inserts 2 Oz bottle HydrX™ extreme duty coolant Arctic Alumina™ thermal paste Part # H20-8501B "Bare" kit without water-block includes: MCR80-F1 Radiator with (1) 80x80x25mm fans rated at 31.4 CFM (28dbA), (2) nylon clamps MCP600™ 12 Volts DC industrial pump connects directly to computer power supply FBK525™ fill and bleed kit assembly 12 feet 1/2" vinyl tubing, and tube inserts 2 Oz bottle HydrX™ extreme duty coolant Arctic Alumina™ thermal paste   Manufacturer Suggested Retail Pricing H20-8501 series liquid cooling kits Part # Processor compatibility MSRP US $ H20-8501A™ AMD® socket A, Intel® socket 370, complete kit $230.00 H20-8501P™ Intel® Pentium® 4, complete kit $230.00 H20-8501X™ Intel® Xeon™, complete kit $230.00 H20-850164™ AMD® Athlon® 64 & Opteron® , complete kit $230.00 H20-8501B™ Bare kit, no water-block included. $177.00 Add-On components & accessories Part # Description MSRP US $ MCW5000-A™ CPU Water-block Assembly for AMD® socket A, Intel® socket 370 $53.00 MCW5000-P™ CPU Water-block assembly for Intel® Pentium® 4 $53.00 MCW5000-X™ CPU Water-block assembly for Intel® Xeon™ $53.00 MCW5000-64™ CPU Water-block Assembly for AMD® Athlon® 64 and Opteron® $53.00 MCW50™ VGA Water-block assembly for ATI & nVidia VGA $38.95 MCW50-FX ™ MCW50 adapter kit for FX5800 and up series VGA $6.50 MCW20-A™ Chipset water-block for AMD® platforms $32.95 MCW20-P™ Chipset water-block for Intel® platforms $32.50 MCW20-R™ Chipset water-block for AMD® and Intel® platforms $37.95 FBK525™ R2 Fill & Bleed kit 525 fits in 5 1/4" bay $28.50 MCR80-F1™ Radiator with (1) 80x80x25mm fan $59.95 MCR80™ Radiator alone $46.50 Y Connector kit 3/8" barb "Y" connector $2.60 MCP600™ 12 Volts Industrial Pump $84.95 MCP600-RK Reducer kit 1/2" barb to 3/8" ID tubing $2.21 Spring inserts 0.375" OD spring extendable to 5" length $.85 Please consult your Swiftech distributor prior to ordering direct from us, or purchase the product factory direct here <<PREVIOUS PAGE