H20-80™ REV. 3SERIES LIQUID COOLING KITS CONTINUED... CUSTOMIZING YOUR OWN KIT FROM VARIOUS COMPONENTS Adding a second radiator is easy, and recommended in the following scenarios: Dual CPU setup: while operating dual CPU's with the basic single radiator kit is possible, the extra thermal load placed on the cooling system might require installing a stronger fan than that delivered with the kit, thus increasing audible noise. Adding a second radiator to the loop restores the proper balance between high performance and low noise offered by the basic H20-80 kit. Extreme Overclocking: for enthusiast users seeking to squeeze extra Mhz from their microprocessors. Extremely quiet operations: where silent operations are preferred, adding a second radiator will allow users to operate the fans at low speed, using a rheostat for example, while maintaining optimum processor temperature, even under substantial overclocks. Adding a second waterblock for multiprocessor environments is easy: simply connected the second waterblock in series: the discharge from one to the inlet of the other. Adding VGA and/or chipset coolers follows the same rule as adding a second waterblock: simply daisy chain the devices in series following the CPU waterblock Note concerning high-end VGA adapters, such as ATI® Raideon® 9700/9800 or nVidia® FX58/5900: it is suggested that adding a second radiator to the circuit will also enable higher overclocks with such graphic adapters. The MCW50™ VGA cooler also available in black The MCW20™ chipset cooler also available in Black back to top VERSIONS SINGLE PROCESSOR SOLUTIONS Part # H20-80-F™ for Intel® Pentium® 4 (socket 478), and AMD® Athon™ 64 & Opteron™ processors MCW6000 "Flat base" water-block with pre-installed tubing Intel® Pentium® 4, socket 478 Hold down plate and clips AMD® Athlon® 64 Hold-down plate and retention hardware MCR80-F2 Radiator with (1) 80x80x25mm fans rated at 31.4 CFM and 28dBA, color coded-quick-connect fittings & fan guard MCP350™ 12 Volts DC industrial pump (connects directly to computer power supply ) , with pre-installed tubing MSRES-525™ 5/14" Drive bay reservoir & fittings 4 feet 1/2" vinyl tubing, and tube inserts 2 Oz bottle HydrX™ extreme duty coolant Céramique™ thermal compound Coolsleeves™ Clear 40" length AVAILABLE IN ROYAL BLUE, OR BLACK MSRP $215.00 Part # H20-80-S™ for Intel® Pentium® 4 (socket LGA775) & AMD® Socket A (Duron, Athlon XP, Sempron) processors includes: MCW6000 "Step base" water block, with pre-installed tubing Intel® Pentium® 4, socket LGA775 hold-down plate and retention hardware AMD® socket A (Duron, Athlon XP, Sempron, MP) hold-down plate and retention hardware MCR80-F2 Radiator with (1) 80x80x25mm fans rated at 31.4 CFM and 28dBA, color coded-quick-connect fittings & fan guard MCP350™ 12 Volts DC industrial pump (connects directly to computer power supply ), with pre-installed tubing MSRES-525™ 5/14" Drive bay reservoir & fittings 4 feet 1/2" vinyl tubing, and tube inserts 2 Oz bottle HydrX™ extreme duty coolant Céramique™ thermal compound Coolsleeves™ Clear 40" length AVAILABLE IN ROYAL BLUE, OR BLACK MSRP $217.50 DUAL PROCESSOR SOLUTION Part # H20-80-D™ for Intel® Xeon™ (all versions) & AMD® Opteron™ dual processors includes: (2) each MCW6000 "Flat base" water-blocks, with pre-installed tubing (2) each Intel® Xeon™ (all versions) holding plates and retention hardware (2) each AMD® Opteron™ holding plates and retention hardware (2) each MCR80-F2 Radiators with 80x80x25mm fans rated at 31.4 CFM and 28dBA each, color coded-quick-connect fittings & fan guard MCP350™ 12 Volts DC industrial pump (connects directly to computer power supply ) , with pre-installed tubing MSRES-525™ 5/14" Drive bay reservoir & fittings 6 feet 1/2" vinyl tubing, and tube inserts 2 Oz bottle HydrX™ extreme duty coolant Céramique™ thermal compound Coolsleeves™ Clear 40" length AVAILABLE IN ROYAL BLUE, OR BLACK MSRP $315.00 Miscelaneous Part # H20-80-B™ "Bare" kit without waterblock includes: MCR80-F2 Radiator with (1) 80x80x25mm fans rated at 31.4 CFM and 28dBA, color coded-quick-connect fittings & fan guard MCP350™ 12 Volts DC industrial pump (connects directly to computer power supply ) , with pre-installed tubing MSRES-525™ 5/14" Drive bay reservoir & fittings 4 feet 1/2" vinyl tubing, and tube inserts 2 Oz bottle HydrX™ extreme duty coolant Céramique™ thermal compound Coolsleeves™ Clear 40" length AVAILABLE IN ROYAL BLUE, OR BLACK MSRP $175.00 Manufacturer Suggested Retail Pricing SINGLE PROCESSOR SOLUTIONS Part # Processor compatibility MSRP US $ H20-80-FB™ Royal Blue Intel® Pentium® 4 (socket 478), and AMD Athlon 64 processor cooling kit $215.00 H20-80-FK™ Black Intel® Pentium® 4 (socket 478), and AMD Athlon 64 processor cooling kit $215.00 H20-80-SB™ Royal Blue Intel® Pentium® 4 (socket LGA 775), and AMD socket A processor cooling kit $217.50 H20-80-SK™ Black Intel® Pentium® 4 (socket LGA 775), and AMD socket A processor cooling kit $217.50 DUAL PROCESSORS KIT H20-80-DB™ Royal Blue Intel® Xeon™ & AMD Opteron complete dual processor and dual radiator cooling kit $315.00 H20-80-DK™ Black Intel® Xeon™ & AMD Opteron complete dual processor and dual radiator cooling kit $315.00 Miscelaneous H20-80-BB™ Royal Blue Bare kit, no waterblock included. $175.00 H20-80-BK™ Black Bare kit, no waterblock included. $175.00 Add-on components & accessories Part # Description MSRP US $ MCW6000-A™ CPU Waterblock Assembly for AMD® socket A, Intel® socket 370 $39.99 MCW6000-P™ CPU Waterblock assembly for Intel® Pentium® 4 (socket 478) $39.99 MCW6000-775™ CPU Waterblock assembly for Intel® Pentium® 4 (socket LGA 775) $39.99 MCW6000-PX™ CPU Waterblock assembly for Intel® Xeon™ $42.50 MCW6000-NX™ CPU Waterblock assembly for Intel® Xeon™ "Nocona", 800 Mhz system bus $39.99 MCW6000-64™ CPU Waterblock Assembly for AMD® Athlon® 64 and Opteron® $42.50 See also MCW6000™ available spare parts   MCW50™-B Roayl Blue VGA Waterblock $40.95 MCW50™-K Black VGA Waterblock $38.95 MCW20-B™ Royal Blue Chipset waterblock for AMD® and Intel® platforms $39.95 MCW20-K™ Black Chipset waterblock for AMD® and Intel® platforms $39.95 MCRES525™ 5 1/4" bay Reservoir $16.95 MCR80-F2™ Radiator with (1) 80x80x25mm fan and quick-connect adapters $59.95 MCR80™ Radiator alone $46.50 Y Connector kit 3/8" barb "Y" connector $2.60 MCP350™ 12 Volts Industrial Pump $79.95 Coolsleeves™ Clear 40" length $2.95 Please consult your Swiftech distributor prior to ordering direct from us, or purchase the product factory direct here Page 1