H20-80™ REV. 2 SERIES LIQUID COOLING KITS CONTINUED... CUSTOMIZING YOUR OWN KIT FROM VARIOUS COMPONENTS Adding a second radiator is easy, and recommended in the following scenarios: Dual CPU setup: while operating dual CPU's with the basic single radiator kit is possible, the extra thermal load placed on the cooling system might require installing a stronger fan than that delivered with the kit, thus increasing audible noise. Adding a second radiator to the loop restores the proper balance between high performance and low noise offered by the basic H20-80 kit. Extreme Overclocking: for enthusiast users seeking to squeeze extra Mhz from their microprocessors. Extremely quiet operations: where silent operations are preferred, adding a second radiator will allow users to operate the fans at low speed, using a rheostat for example, while maintaining optimum processor temperature, even under substantial overclocks. Adding a second waterblock for multiprocessor environments is easy: simply connected the second waterblock in series: the discharge from one to the inlet of the other. Adding VGA and/or chipset coolers follows the same rule as adding a second waterblock: simply daisy chain the devices in series following the CPU waterblock Note concerning high-end VGA adapters, such as ATI® Raideon® 9700/9800 or nVidia® FX58/5900: it is suggested that adding a second radiator to the circuit will also enable higher overclocks with such graphic adapters. The MCW50™ VGA cooler The MCW20™ chipset cooler Configuring the kit for 3/8" OD tubing: while it must be noted that 3/8" OD tubing will significantly reduce coolant flow-rate and affect cooling performance, such a configuration is possible, and sufficient in non or mildly overclocked systems: for example when users are mainly concerned with quiet operations. The following parts are then needed to adapt the kit to 3/8" OD tubing: Radiator : Part # PI0412S Pump, fill & bleed kit, and water-blocks: simply plug-in the following adapter into each 1/2" fitting, to reduce them to 3/8": For the MCW50 and MCW20 Use Part # PI061612S For the MCW6000 Use Part # PI0412S Example MCW50 back to top VERSIONS Intel® solutions Part # H20-80-P™ for Intel® Pentium® 4 processors includes: MCW6000-P™ Intel® Pentium® 4, socket 478 compatible waterblock, with pre-installed tubing MCR80-F2 Radiator with (1) 80x80x25mm fans rated at 31.4 CFM and 28dBA, color coded-quick-connect fittings & fan guard MCP650™ 12 Volts DC industrial pump (connects directly to computer power supply ) , with pre-installed tubing MSRES-525™ 5/14" Drive bay reservoir & fittings 4 feet 1/2" vinyl tubing, and tube inserts 2 Oz bottle HydrX™ extreme duty coolant Céramique™ thermal compound Coolsleeves™ Clear 40" length MSRP $215.00 Part # H20-80-775™ for Intel® Pentium® 4 processors includes: MCW6000-775™ Intel® Pentium® 4, socket LGA775 compatible waterblock, with pre-installed tubing MCR80-F2 Radiator with (1) 80x80x25mm fans rated at 31.4 CFM and 28dBA, color coded-quick-connect fittings & fan guard MCP650™ 12 Volts DC industrial pump (connects directly to computer power supply ), with pre-installed tubing MSRES-525™ 5/14" Drive bay reservoir & fittings 4 feet 1/2" vinyl tubing, and tube inserts 2 Oz bottle HydrX™ extreme duty coolant Céramique™ thermal compound Coolsleeves™ Clear 40" length MSRP $217.50 Part # H20-80-X™ for Intel® Xeon™ (socket 603/604, 400 & 533Mhz system bus) single processor kit includes: MCW6000-PX™ Intel® Xeon™ compatible waterblock with pre-installed tubing MCR80-F2 Radiator with (1) 80x80x25mm fans rated at 31.4 CFM and 28dBA, color coded-quick-connect fittings & fan guard MCP650™ 12 Volts DC industrial pump (connects directly to computer power supply ) , with pre-installed tubing MSRES-525™ 5/14" Drive bay reservoir & fittings 4 feet 1/2" vinyl tubing, and tube inserts 2 Oz bottle HydrX™ extreme duty coolant Céramique™ thermal compound Coolsleeves™ Clear 40" length For a dual processor configuration, add the following parts to your kit: (1) MCW6000-PX water-block (1) MCR80-F2 radiator (fan included) MSRP $217.50 Part # H20-80-NX™ for Intel® Xeon™"Nocona" (800Mhz system bus) complete dual processor, dual radiator kit includes: (2) each MCW6000-NX™ Intel® Xeon™ "Nocona" compatible waterblocks with pre-installed tubing (2) each MCR80-F2 Radiators with 80x80x25mm fans rated at 31.4 CFM and 28dBA each, color coded-quick-connect fittings & fan guard MCP650™ 12 Volts DC industrial pump (connects directly to computer power supply ) , with pre-installed tubing MSRES-525™ 5/14" Drive bay reservoir & fittings 6 feet 1/2" vinyl tubing, and tube inserts 2 Oz bottle HydrX™ extreme duty coolant Céramique™ thermal compound Coolsleeves™ Clear 40" length MSRP $315.00 AMD® Solutions Part # H20-80-A™ for AMD® processors, includes: MCW6000-A™ AMD® Duron®, Athlon®, MP & XP, socket 462 compatible waterblock with pre-installed tubing MCR80-F2 Radiator with (1) 80x80x25mm fans rated at 31.4 CFM and 28dBA, color coded-quick-connect fittings & fan guard MCP650™ 12 Volts DC industrial pump (connects directly to computer power supply ) , with pre-installed tubing MSRES-525™ 5/14" Drive bay reservoir & fittings 4 feet 1/2" vinyl tubing, and tube inserts 2 Oz bottle HydrX™ extreme duty coolant Céramique™ thermal compound Coolsleeves™ Clear 40" length MSRP $215.00 Part # H20-8600-64™ for AMD® Athlon® 64 & Opteron® processors includes: MCW6000-64™ AMD® Athlon® 64 & Opteron® compatible waterblock with pre-installed tubing MCR80-F2 Radiator with (1) 80x80x25mm fans rated at 31.4 CFM and 28dBA, color coded-quick-connect fittings & fan guard MCP650™ 12 Volts DC industrial pump (connects directly to computer power supply ) , with pre-installed tubing MSRES-525™ 5/14" Drive bay reservoir & fittings 4 feet 1/2" vinyl tubing, and tube inserts 2 Oz bottle HydrX™ extreme duty coolant Céramique™ thermal compound Coolsleeves™ Clear 40" length AJ00172 backing plate and retention frame MSRP $221.50 Miscelaneous Part # H20-80-B™ "Bare" kit without waterblock includes: MCR80-F2 Radiator with (1) 80x80x25mm fans rated at 31.4 CFM and 28dBA, color coded-quick-connect fittings & fan guard MCP650™ 12 Volts DC industrial pump (connects directly to computer power supply ) , with pre-installed tubing MSRES-525™ 5/14" Drive bay reservoir & fittings 4 feet 1/2" vinyl tubing, and tube inserts 2 Oz bottle HydrX™ extreme duty coolant Céramique™ thermal compound Coolsleeves™ Clear 40" length MSRP $175.00 Manufacturer Suggested Retail Pricing Intel® solutions Part # Processor compatibility MSRP US $ H20-80-P™ Intel® Pentium® 4 (socket 478), processor cooling kit $215.00 H20-80-775™ Intel® Pentium® 4 (socket LGA 775), processor cooling kit $217.50 H20-80-X™ Intel® Xeon™, single processor cooling kit $217.50 H20-80-NX™ Intel® Xeon™ "Nocona" 800Mhz system bus, complete dual processor and dual radiator cooling kit $315.00 AMD® solutions H20-80-A™ AMD® socket A, Intel® socket 370, processor cooling kit $215.00 H20-80-64™ AMD® Athlon® 64 & Opteron® , processor cooling kit $221.50 Miscelaneous H20-80-B™ Bare kit, no waterblock included. $175.00 Add-on components & accessories Part # Description MSRP US $ MCW6000-A™ CPU Waterblock Assembly for AMD® socket A, Intel® socket 370 $39.99 MCW6000-P™ CPU Waterblock assembly for Intel® Pentium® 4 (socket 478) $39.99 MCW6000-775™ CPU Waterblock assembly for Intel® Pentium® 4 (socket LGA 775) $39.99 MCW6000-PX™ CPU Waterblock assembly for Intel® Xeon™ $42.50 MCW6000-NX™ CPU Waterblock assembly for Intel® Xeon™ "Nocona", 800 Mhz system bus $39.99 MCW6000-64™ CPU Waterblock Assembly for AMD® Athlon® 64 and Opteron® $42.50 See also MCW6000™ available spare parts   MCW50™ VGA Waterblock assembly for ATI & nVidia VGA $38.95 MCW50-FX ™ MCW50 adapter kit for FX5800 and up series VGA $6.50 MCW20-A™ Chipset waterblock for AMD® platforms $32.95 MCW20-P™ Chipset waterblock for Intel® platforms $32.50 MCW20-R™ Chipset waterblock for AMD® and Intel® platforms $37.95 FBK525™ R2 Fill & Bleed kit 525 fits in 5 1/4" bay $28.50 MCR80-F2™ Radiator with (1) 80x80x25mm fan and quick-connect adapters $59.95 MCR80™ Radiator alone $46.50 Y Connector kit 3/8" barb "Y" connector $2.60 MCP650™ 12 Volts Industrial Pump $79.95 MCP600-RK Reducer kit 1/2" barb to 3/8" ID tubing $2.21 Coolsleeves™ Clear 40" length $2.95 Please consult your Swiftech distributor prior to ordering direct from us, or purchase the product factory direct here Page 1