H20-220-T™THERMOELECTRIC SERIES LIQUID COOLING KITS


The H20-220-64T™ for AMD K8 Processors


Introduction

The H20-220-T™ series of thermoelectric liquid cooling kits are designed for extreme cooling applications where sub-ambient processor temperatures are desired.

While Swiftech recognizes that this kit solution is by no means universally compatible with all computer cases, our design choices have been made to allow installation in the largest possible number of chassis with a minimum of modifications. The kits are also meant to include absolutely everything that is needed to perform a complete thermoelectric installation with proper components insulation.

Performance features and benefits

  • Extreme performance MCW5002-T™ series water-blocks with 226 Watts thermoelectric module for sub-ambient processor temperatures: up to 50°C drop in processor operating temperature.
  • Dissipation of the thermal load is achieved with our MCR220-QP copper fins radiator for dual 120mm fans, selected for moderate noise output (34dBA each, 37 dBA total).
  • Extreme performance MCP655™ 12 Volts DC industrial pump.
  • 1/2" ID tubing for maximum flow rate inside the circuit.

Convenience & reliability features:

  • Versatility: can be used with a large number of cases with few and simple case modifications. The MCR220-QP radiator is shipped with the MCB120 "Radbox" already pre-installed, making it a "bolt-on" item and meant to be installed externally to the back of the chassis.
  • More economical and easier to implement than vapor compression systems.
  • High-reliability with Solid state thermoelectric modules (50,000 hours MTBF)
  • High-reliability and no-maintenance MCP655 industrial pump features quiet operations thanks to brushless motor, and is rated at 50,000 hour MTBF(Mean Time Between Failures) equivalent to 5 year lifetime
  • Convenience: 12 Volt DC pump plugs directly into computer power supply
  • Convenience: MCRES-MICRO reservoir fits anywhere, and eliminates the need for frequent maintenance (3 years between refills)
  • The S320-12 auxiliary 25 amps power-supply is provided with the kit, and includes a relay switch and harness to couple the auxiliary power supply to the main power supply.
  • Convenience: all Insulation products such as dielectric grease and conformal coating are included with the kit

Four kit models support the most popular microprocessors:

  • Intel® Pentium® 4 (lga 775)
  • Intel® Pentium® 4 (socket 478)
  • AMD® Athlon® 64 (socket 754, 939,940)
  • AMD® Athlon® XP, Sempron socket 462)

Performance data

What can be expected in terms of overclocking ?

The integrated circuit industry rule of thumb states that a chip will gain an average of 2 to 3% in operating frequency for every 10°C drop in operating temperature. The chart below is helpful in estimating what the processor temperature will be after installation of the kit, and then project the microprocessor frequency gain using this rule of thumb.

It is estimated that coolant temperature will be maintained at approximately 10C above ambient temperature in this kit configuration.


Thermoelectric module characteristics

Couples   U max   I max   DT max   Q max   L ×W×H(mm)   R(Ω)  
127 15.2 VDC 24 A >67 ° C 226.1 W 50 × 50 × 3.10 0.48  
Measured power draw at 12 VDC: 18A

INDIVIDUAL COMPONENT SPECIFICATIONS

VERSIONS

INTEL SOLUTION

art # H20-220-775T™ for Intel® Pentium® 4 (socket LGA775)

  • (1) MCW5002-775T Thermoelectric waterblock
  • (1) MCR220-QP Radiator/fan and "Radbox" assembly
  • (1) MCP655™ 12 Volts DC industrial pump, with pre-installed tubing
  • (1) MCRES-MICRO acrylic reservoir
  • (1) S320-12 Kit auxiliary power supply
  • 6 feet 1/2" ID vinyl tubing, and tube inserts
  • 2 Oz bottle HydrX™ extreme duty coolant
  • (1) Céramique™ thermal compound
  • (1) Luberex dielectric grease
  • (1) Conformal coating spray

MSRP $550.00

AMD SOLUTION

Part # H20-220-64T™ for AMD® Athlon™64 processors

  • (1) MCW5002-64T Thermoelectric waterblock
  • (1) MCR220-QP Radiator/fan and "Radbox" assembly
  • (1) MCP655™ 12 Volts DC industrial pump, with pre-installed tubing
  • (1) MCRES-MICRO acrylic reservoir
  • (1) S320-12 Kit auxiliary power supply
  • 6 feet 1/2" ID vinyl tubing, and tube inserts
  • 2 Oz bottle HydrX™ extreme duty coolant
  • (1) Céramique™ thermal compound
  • (1) Luberex dielectric grease
  • (1) Conformal coating spray

MSRP $550.00

Please consult your Swiftech distributor prior to ordering direct from us, or purchase the product factory direct here

Back to top

 




Contents

Introduction
Performance Data
Components specifications
Versions/Models
MSRP price-list

Installation Guides

English
H20-220-T

French
H20-220-T