Quiet Power liquid cooled barebones

FS020-H20 series Liquid Cooled entry level server case

Introduction This line of products is designed to support extreme thermal loads, while operating at very low noise levels.  It features  pre-installed, plug-and-play liquid cooling systems using our H2O-22500 series cooling kits. The product is equipped with 1/2" OD tubing throughout, enhancing flow rate and performance compared to earlier 3/8" versions. The system ships with the cooling fluid already filled, either in single or dual processor configuration (see MSRP for various configurations). Optional vga cooling is also available, and can be factory installed using the MCW50 graphics cooler. In addition to the liquid cooling design emphasizing heat removal from the processor (s), the case configuration itself provides exceptional ventilation to the components by use of four 120mm fans strategically located throughout the case. Total noise level is approximately 34 dBA, whereas flow through the case is 110 CFM intake, and 110 CFM exhaust.

back to top

Cooling specifications: Cooling fans Intake:  2 x 120x25mm - 55CFM/25dBA each - One behind the front bezel, and one on the side panel for graphics card/system board cooling Exhaust: 2 x 120x25mm - 55CFM/25dBA each - Blowing directly through the heat exchanger Liquid cooling kit specification and processor compatibility All models use the MCW5000™ water-block configured to various processors retention mechanisms, and the optional MCW50 for VGA cooling. Processor cooling: AMD ® Duron ®, Athlon ® MP, XP, Intel Pentium® 3: MCW5000-A Intel® Pentium® 4: MCW5000-P Intel® Xeon™: MCW5000-PX VGA cooling: ATI® Radeon 9000 to 9700, and Nvidia® Gforce & FX families of products, with supplied retention mechanisms, or permanent mount with bonding agents for other graphics chips: MCW50    Cooling fluid 95% purified water, 5% Swiftech Hydrx™ coolant CLICK ON AN AREA OF INTEREST FOR DETAILS Dual CPU setup (as shipped) Click on picture to enlarge FS020-H20-DXV Dual Xeon™ setup with VGA cooler, as shipped The system is already filled with coolant, and there is ample tubing to move the block around to accommodate different motherboard configurations. Users Photo Gallery Dan Dawson's

back to top

Case specifications: ATX Chassis supporting: AMD® single & dual processor system boards Intel® single and dual Pentium® III, Xeon™, and Pentium® 4 processors.  DIMENSION (H*D*W): 21" x 18 1/4 x 9" MAIN BOARD SIZE: MS440GX, ATX DRIVE BAYS: 5.25"*4, 3.5"*2(FDD), 3.5"*1(1.6" height)(FDD) 3.5"*2(1" height), 3.5"*2(option) EXPANSION SLOT: 7 SLOTS POWER TYPE: ATX form factor (power supply not provided) METAL: SECC SHEET MECHANICAL: MEET FCC, CE GROSS WEIGHT 40 lbs

back to top

Power supply: Not provided

back to top

MSRP and available versions Please consult your Swiftech distributor prior to ordering direct from us, or purchase the product factory direct here We do not ship retail outside of the US. MODEL Water- block Graphics Cooling US $ FS020-H20-A MCW5000-A No 399.00 FS020-H20-AV MCW5000-A MCW50 438.00 FS020-H20-DA MCW5000-A (2) No 455.00 FS020-H20-DAV MCW5000-A (2) MCW50 494.00 FS020-H20-P MCW5000-P No 399.00 FS020-H20-PV MCW5000-P MCW50 438.00 FS020-H20-DX MCW5000-PX (2) No 456.00 FS020-H20-DXV MCW5000-PX (2) MCW50 495.00 All above models available for export (220/230volts) with "/E" extension to the part number.

back to top