Designed in the USA One of more patents pending

Introduction ap·o·gee: The farthest or highest point; the apex; a final climactic stage The Apogee™ GTZ is Swiftech's new flagship water-block. While it shares the same name with its predecessors, it also leaps beyond the GT and GTX performance charts thanks to an entirely new design that pushes and refines both thermal and mechanical specifications to the limits of today's technology. Picture Gallery The Apogee™ GTZ paired with the MCW-NBMAX North Bridge cooler on an Asus® Maximus II Formula

Performance Data Thermal Design Thermal design of the cooling engine combines the benefits of direct coolant impingement over the CPU area with an entirely new copper base plate design which is primarily characterized by a pin matrix composed of 225 µm (0.009") micro structures. This results in a 20% improvement in thermal resistance compared to the Apogee™ GTX. Pressure Drop Specification System flow Rate When the Apogee™ GTZ is integrated in an actual system, the hydraulic pressure drop remains well within the efficiency range of current high-pressure pumps such as the MCP350 or MCP655 as illustrated in the graph below: Back to top Mechanical Design Mechanical design of the copper base plate is optimized for Intel® socket LGA 775 and 771. The assembly features a patent pending design characterized by a topographically mapped CPU contact area which results in a 75% and up to 300% improvement in TIM joint thermal resistance compared to the Apogee™ GT/GTX series. Other types of sockets such as AMD® socket F, AM2, and 940 as well as upcoming sockets similar in design to that of socket 775 may also benefit from the enhanced contact area. Retention Mechanism An enhanced tool free retention system using thumb-nuts paired with a universal socket 775 motherboard back-plate guarantee high quality, safe and repeatable mounts. Comparative Temperature Data The following tables report the data collected from testing performed with actual retail processors under 100% load using CPU Burn. Published results are the best of a minimum of 5 mounts using the manufacturer supplied retention mechanism. Flow rate and coolant inlet temperature were maintained at a constant and arbitrarily chosen 1.5 gpm and 30 °C respectively. These results are indicative of our test bench settings and of the tested processors only. Results may vary from one processor to another. Competitive data is provided for comparative purposes, and is only representative of the specific waterblock samples tested here. Where different nozzles were available, best results are provided. Where temperatures only are given, these are averaged- out core values reported by the processor Digital Thermal Sensors (DTS). Intel® Core™ 2 Quad Q6600 G0 (@3500 Mhz - 1.38/1.50 V Actual/Bios) Apogee™ GTZ 50.25 °C Apogee™ GTX 58.00 °C Intel® Core™ 2 Quad Q9450 (@3500 Mhz - 1.27/1.40 V Actual/Bios) Apogee™ GTZ 61.50 °C EK Supreme 62.25 °C D-Tek Fuzion V2 (with 4.5mm nozzle) 62.75 °C Apogee™ GTX 64.25 °C Intel® Core™ 2 Duo E6600 B3 (@3000 Mhz - 1.47/1.55 V Actual/Bios) Apogee™ GTZ 55.50°C D-Tek Fuzion V2 (with 4.5mm nozzle) 56.50°C EK Supreme 57.00°C Apogee™ GTX 58.00°C The following table compares C/W data calculated between temperatures reported by the DTS and those measured from a modified processor featuring an additional thermocouple located at the center of the IHS. Intel® Core™ 2 Quad Q6600 G0 (@3500 MHz – 1.38/1.50 V Actual/Bios) @1.5gpm C/W (DTS) C/W (IHS) Apogee™ GTZ .143 .054 EK Supreme .152 .058 D-Tek Fuzion V2 (4.5mm nozzle) .159 .066 Apogee™ GTX .203 .094

Back to top

Motherboard and CPU Compatibility The Apogee™ GTZ is shipped with an Intel® Core™ 2 (socket 775) compatible hold-down plate and complies with socket 775 keep-out specification, thus guaranteeing compatibility with all socket 775 type motherboards. Optional hold-down plates provide compatibility with the following platforms: Part # Apogee-GTZ-Ci7 provides compatiblity with Intel® Core® i7, and is fully compliant with the components keep-out specification. The kit is composed of a replacement hold-down plate for the water-block, and a motherboard stiffening back-plate needed for all socket 1366 desktop motherboards. Apogee-GTZ-Ci7 Part # Apogee-GTZ-1U-S-HD, is a multi-platform hold-down plate that provides compatibility with Intel® Xeon™ socket 771, and legacy 603, 604 AMD® socket F, and legacy 754, 939, 940 Due to the hybrid nature of this hold-down solution, users are advised to check for possible clearance issues with their particular motherboards by using the schematic below. Part # Apogee-GTZ-AM2-HD, provides compatibility with AMD® Socket AM2, and is fully compliant with the component keep-out specification. Fittings & tubing compatibility The Apogee™ GTZ ships pre-installed with chrome plated high flow 1/4" BSPP x 1/2" barbs and also includes a pair of 3/8" barb fittings. Back to top

Specifications Exploded View Exploded view The CNC machined C110 copper base is lapped, passivated (to maintain a bright finish) and features a 225 µm (0.009") micro pin matrix. The base plate features a rich mirror finish. The 225 µm (0.009") micro pin matrix is at the heart of the Apogee™ GTZ lowest ever thermal resistance. Back to top The cold plate surface is topographically mapped to provide an optimized TIM joint with socket 775 & 771 processors. As a result, the Apogee™ GTZ requires a specific mounting orientation with respect to the CPU socket in order to optimize performance as illustrated below:   The housing is CNC machined out of durable Delrin material, and designed for impingement cooling over the CPU hottest area. The flow path, as illustrated below shows that the Apogee™ GTZ is port specific: inlet and outlet cannot be interchanged.   Dimensions Net Weight: 239 g

Back to top

MSRP & Parts Please consult your Swiftech distributor prior to ordering direct from us, or purchase the product factory direct here Product Information Part # Description Price Apogee™ GTZ water-block Assembly including water-block, hold-down plates, retention hardware for Intel® socket 775 (Pentium® 4, Celeron™, Core™ 2 Duo, Core™ 2 Quad, Core™ 2 Extreme), 1/2" and 3/8" hose barbs, Arctic Céramique thermal paste, socket 775 motherboard back-plate, installation guide $69.95 Options Apogee-GTZ-Ci7 Apogee GTZ hold-down and motherboard back-plate combo (use existing water-block fasteners) $9.95 Apogee-GTZ-1U-S-HD Apogee™-1U hold-down plate and hardware for Socket 603/604, 771(Intel® Xeon™ - all versions) Socket 754, 939, 940, F (AMD® 64 & Opteron™, including "uncapped" processors). $9.95 Apogee-GTZ-AM2-HD Apogee™GTX Hold down plate and hardware for AMD® Socket AM2 $9.95

Back to top